ATH-Heinl Single Lift 12PL Manual De Instrucciones página 61

Warning
The factory-set working pressure is adjusted to the maximum nominal load. The pressure
2
relief valve must not be tampered with.
Changing the setting can lead to serious damage.
1.3 Operation
7
6
5
4
Lift button
to raise the lift
Lower button
to lower the lift completely (detents and lowering valve are opened)
Car socket 12V DC
Built-in socket 1 x 230V
Button parking (LOCK)
to lower the lift into the notch (only the lowering valve is opened)
Operating light
indicates whether the lifting platform is ready for operation
Lockable main switch with emergency stop function
to switch the lift on and off and to secure the lift from operation by unauthorized persons
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
1
2
3
Release date: 02.05.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
61