ATH-Heinl Single Lift 12PL Manual De Instrucciones página 71

3 ASSEMBLY
Note
These instructions are not to be seen as assembly instructions, only hints and help are given
here for knowledgeable and skilled assemblers.
Warning
Appropriate clothing and individual protective devices must be worn for the following work.
Caution
Incorrect assembly and adjustments will result in exclusion of liability and warranty.
Partially pre-assembled machines must be inspected, instructed and accepted by a competent person before
commissioning.
Assembly of machines must be carried out by a skilled and qualified person.
3.1 Foundation plan
Attention
Do not mount the lifting platform on asphalt or soft screed. There must be no expansion joints
or cracks that would interrupt the continuity of the reinforcement. The load bearing capacity
of false ceilings must be checked by the operator.
The lifting platform may be impaired in its function by standing at an angle.
Observe the specified concrete quality and curing time
Concrete quality
Curing time of concrete
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 02.05.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
C20/25
Min. 20 days
71