Levenhuk Ermenrich Zing ST30 Guia Del Usuario página 3

Ermenrich Zing ST30 Socket Tester
EN
Using
•
Check that the device is clean as well as free of dust, grease, and moisture. Examine all of the socket leads for damage. Test the device on a
properly functioning socket before using it for the first time.
•
Insert the device into a power socket. Compare the LED indicator lights to the LED data table below. Pull the device out of the socket.
•
If any errors are found, the wiring must be tested.
Note!
This device does not detect a connection to earth.
LED decryption table
№ Wiring condition
1 CORRECT
2
LIVE/NEUTRAL REVERSE
3 LIVE/EARTH REVERSE
4
NO EARTH
5 NO NEUTRAL
6
NO LIVE
LED is on
LED is off
Specifications
Operating voltage range
Operating frequency
Plug
Power consumption
Overvoltage category
Pollution degree
Operating temperature range
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Make sure that the device plugs match the outlet. Never modify the plug in any way. Do not expose the device to rain or wet conditions. Use
the device only within the permitted range. Do not use the device if it is not working properly. Please note that the parameters of the power
supply must comply with the technical characteristics of the device. Do not try to disassemble the device on your own for any reason. For
repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive
mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical
specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is
swallowed, seek medical attention immediately. Keep away from children.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty
against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk
accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles
you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions
are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
LED display
230V AC
50Hz
EU standard
< 1.5W
Cat. /300 V
Ⅲ
2
0... +40°C (32... 104°F)
AC
3