Publicidad
Idiomas disponibles
Idiomas disponibles
Operating mode
Semi-automatic mode
The light now only switches OFF automatically. Light is
switched ON manually. Light must be requested using the
button and stays ON for the time set.
Fully automatic mode
The light automatically switches ON and OFF in relation to
light level when someone is present. Light can be switched
ON and OFF manually at any time. This temporarily inter-
rupts the automatic switching function.
Presentation mode
If light is switched OFF via a push-button, the sensor acti-
vates the presentation mode. The load remains switched
OFF until movement is detected. As soon as movement
is no longer being detected and the stay-ON time has
elapsed, the sensor returns to normal sensor mode.
Button input
Pushbuttons can be integrated and configured via the
STEINEL Connect app. In addition to input S, further push-
buttons can be assigned to the sensor from the BT mesh
network. A function can also be assigned to each of these
buttons. A pushbutton switch with "ON / OFF" function
provides the option of switching lighting ON and OFF by
hand. The "ON" function cannot be used for switching light
OFF manually. In this case, the stay-ON time is re-started
each time the button is pressed. The "OFF" function can
only be used to switch lighting OFF manually. "ON x min"
and "OFF x min" functions are also available that can be
used for switching lighting ON or OFF for a defined period
of time. A pushbutton is required for operating the sensor
in semi-automatic mode.
– 72 –
Contents
Publicidad
