Work Pro W PA 5506 Instrucciones De Usuario página 3

EN
When using the Amplifier
When found following irregular situation during amplifier is in use, immediately switch off the
power, disconnect the power supply plug from the AC outlet. Don' t try to operate the amplifier
again. Contact your local dealer to check the amplifier.
The amplifier falls.
Amplifier is malfunction.
Water or any metallic object gets into the amplifier.
The smoke or strange smell coming from the amplifier.
The power supply cord is damaged, such as exposure of the core, disconnection etc..
DO NOT put cups, bowls, or other containers with liquid or metallic object in it on the top of the
amplifier. If they spill accident ally into the amplifier, it may result in fire or electric shock.
DO NOT touch the power supply plug during thunderi n g and lightning, for it may result in electric
shock.
DO NOT insert or drop the metallic objects or flammable materials into the ventilation slots of the
amplifier, for it may result in fire or electric shock.
DO NOT open nor remove the amplifier cover to prevent fire or electric shock, for there are high
voltage components inside the amplifier.
CAUTION
PANEL DESCRIPTION
When Installing the Amplifier
DO NOT remove nor plug in the power supply plug with wet hands, for it may cause electric shock.
When unplug the power supply cord, be sure to grasp the power supply plug. DO NOT pull on the
cord itself. Operating the amplifier with damage d power supply cord may cause fire or electric
shock.
Avoid installing the amplifier in humid or dusty places, the area exposed to the direct sunlight,
locations generating smoke or steam, or the spot near the heaters. It may result in fire or electric
shock.
When moving the amplifier, be sure to remove its power supply cord from the wall outlet. Moving
the amplifier with the power cord connected to the outlet may cause damage to the power cord, and
resulting in fire or electric shock. When removing the power cord, be sure to grasp its plug to pull.
DO NOT block the ventilation slots of the amplifier chassis. It will cause the temperature rising
and result in fire.
PA 5506 User Manual/Manual de uso Pag. 2