Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
TIME CONTROLLED PARAMETERS
PREHEAT TIMER
Press the "PRESS TO CHANGE MODE"
button until the indicator light is beside
"PREHEAT TIMER".
NOTE:
The "PREHEAT TIMER" allows the unit to
preheat the medium. The unit will run at 50%
Air Speed until the unit reaches the default
preheat temperature or 90 minutes whichever
comes first. The "PREHEAT TIMER" will operate
Monday through Friday only and can be set
to automatically start at a predetermined time
and heat the medium to a predetermined
temperature. See page 18 for setting the default
parameters of the "PREHEAT TIMER.
Press the "PRESS ONCE TO TURN ON
PREHEAT TIMER" button to illuminate the
"PREHEAT TIMER ON" indicator light. Press again
to start the "PREHEAT TIMER".
NOTE:
The "PREHEAT TIMER" indicator light must be
set at the end of each day in order for it to
automatically come on the next day.
The "STOP" button is used to turn off the
Preheat if desired.
15
Fluidotherapy ® - Dry Heat Therapy
CLOCK
Press the "PRESS TO CHANGE MODE" button
until the indicator light is beside "CLOCK".
NOTE:
The "PREHEAT TIMER" will not function until
the Clock is set.
Press the "INCREASE" button to set hours.
Press the "DECREASE" button to set minutes.
NOTE:
The "PM" indicator light will illuminate when
PM hours are reached.
Publicidad
