Publicidad
Idiomas disponibles
Idiomas disponibles
Note: Temperature can only be set when in cooling mode.
a.
Cooling Mode: Perfect for cooling a room in hot weather. Use the up and down buttons
when in cooling mode to set the desired temperature between 16°C (60°F) and 30°C (80°F).
The appliance will cool the room if the room temperature goes above the set temperature.
If the room temperature goes below the set temperature, cooling mode will pause, but the
fan will remain operating at the set fan speed. IMPORTANT: The heat exhaust hose must be
connected to allow the hot air to be discharged outside. See instructions below.
b.
Fan-Only Mode: The appliance operates at the set fan speed, blowing cold air into the
room. The room temperature is displayed on the digital display panel. Note: The heat
exhaust hose does not have to be connected to the appliance.
c.
Dry (Dehumidifying) Mode: Ideal for reducing room humidity in humid and damp times
of year. The appliance will dehumidify the room if the room temperature is greater than or
equal to 17°C (62°F) and the fan will operate at the low fan speed. If the room temperature
decreases to less than or equal to 15°C (59°F) the appliance will stop dehumidifying the
room, but the fan will continue to operate.
d.
Sleep Mode: Set sleep mode to reduce energy consumption when in cooling mode. To
activate, press the sleep button on the remote control or both the timer and down buttons
on the control panel at the same time. The display will blink five times with SL to confirm
sleep mode has been set then revert to the set temperature. In sleep mode, after two hours
the set temperature will increase automatically by 1°C (33°F). After another two hours, the
set temperature will increase automatically by a further 1°C (33°F). and the fan speed will
change to low fan speed if it is not already at this fan speed. The appliance will continue to
run at this setting until turned off.
•
Timer Button: you can set your device to turn on or off automatically in one hour increments
(from 1-24hrs) using the timer button.
Setting a Turn-On Timer
1.
Ensure the appliance is plugged in and the power socket is turned on.
2.
Press the timer button to activate the timer function.
3.
Press the up and down buttons to set the desired time (1-24 hours) until turn-on.
4.
The time digits will blink five times to confirm a timer has been set and the timer indicator
light will remain illuminated.
5.
Select the desired settings prior to turn-on.
6.
To check the remaining time until turn on, press the timer button.
7.
To cancel the turn-on timer, set the time to 0 hours or turn the appliance on and off.
Note: If no desired settings are selected the appliance will turn on in the previously set settings.
Setting a Turn-Off Timer
1.
Ensure the appliance is plugged in and the power socket is turned on.
2.
Press the power button to turn the appliance on.
3.
Press the timer button to activate the timer function.
4.
Press the up and down buttons to set the desired time (1-24 hours) until turn-off.
5.
The time digits will blink five times to confirm a timer has been set and the timer indicator
16 of 76 | English
light will remain illuminated.
6.
Select the desired settings prior to turn-off.
7.
To check the remaining time till turn- off press the timer button.
8.
To cancel the turn-off timer set the time to 0 hours or turn the appliance off and on.
WIFI AND SMART LIFE APP SET-UP
― ―
Smart Life is a centralised app for smart device management. With Smart Life, you can control
your smart devices remotely and set up a complex chain of commands and automation. To
connect your Pro Breeze smart air conditioner to a smartphone via Wi-Fi through the Smart Life
app, follow the below steps.
Note: Ensure WiFi network is set to 2.4GHz.
•
Download the Smart Life app by Tuya Inc from the Apple App Store or Google Play Store.
•
Register for a Smart Life account.
•
Log into the Smart Life app.
•
On the Home page tap Add Device or the "+" symbol in the top right hand corner.
•
Tap Large Home Appliances.
•
Tap Air Conditioner.
•
Plug in the appliance and ensure the power socket is turned on.
•
Press the power button to turn on the appliance and then press the power button again to
turn off the appliance and place it in standby mode.
•
Press and hold the fan speed button for three seconds to activate the appliance's WiFi pairing
function. After three seconds the WiFi indicator light will begin to blink.
•
In the Smart Life app tap "Confirm WiFi Indicator Light Rapidly Blinking".
•
Input your WiFi password and tap Confirm.
•
The Smart Life app will automatically connect to the appliance and show Successfully Added
Device.
•
Return to the Smart Life app home page and tap the appliance's name.
•
Use the controls to fully control the appliance and set desired settings etc.
•
After successfully pairing your unit with the Smart-Life app, the air conditioner is ready to
connect with Amazon Echo and Google Home (see below).
Notes:
•
When the device is online, it can be controlled using the SmartLife app.
•
When the device is offline, it displays "Offline" and can be remotely powered on.
Amazon Echo Set-Up
Before connecting the appliance to an Amazon Echo device via WiFi, ensure:
•
The Smart Life app must have already been downloaded and the appliance successfully
paired with the Smart Life app.
•
The Amazon Alexa app must have already been downloaded.
•
An Amazon Echo device must be paired with the Amazon Alexa app.
To connect Pro Breeze smart air conditioner to an Amazon Echo device via Wi-Fi through the
Smart Life app follow the below steps.
English | 17 of 76
Publicidad
