Descargar Imprimir esta página

Intellinet Network Solutions 561983 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Instructions
The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports offers an
array of time-saving, cost-effective features while providing superior network throughput. No
configuration is required and installation is plug and play. With a backplane speed of 36 Gbps,
plenty of performance is available for your computers, servers and other networking devices. Each
of the ports automatically senses the link speed of the connected network device and adjusts to
10, 100 or 1000 Mbps for compatibility and maximum performance. This PoE switch is designed to
provide compatible devices with enough power when needed. It offers up to 30 watts of power
per port until its power budget of 250 watts is reached. The Powered Device Monitor feature
(PDM) restarts any connected PoE device that fails to respond or send out network traffic.
Green Ethernet Technology
This Intellinet Network Solutions switch detects link status to all connected devices and
reduces the power usage of ports not in use. In addition, the switch can adjust the level of
power output based on the length of the network cable connected to a particular port. This
feature allows for the enjoyment of maximum network performance, and when things slow
down, it automatically scales back power usage to conserve energy and save money.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/561983 or scan the QR code on the cover.
Front Panel
LED
PWR
LNK/ACT
(1-16; 17S &
18S [SFP])
PoE (1-16)
PoE Max
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn't indicate
a link or activity, check the corresponding device for proper setup and operation.
Slide Switch
• Default: default mode; allows normal communication between ports 1 – 18.
• VLAN: isolates ports 1 – 16 from each other while
allowing them to connect to ports 17 and 18.
• Extend: set PoE ports to full 10 Mbps and extend Ethernet up to 250 meters (820 ft.).
2
English
COLOR
STATUS
Off
Green
On
Off
Green
On
Flashing
Off
Orange
On
Flashing
Orange
On
STATUS DESCRIPTION
No device is connected to the port.
A device is connected to the port.
Sending or receiving data
No powered device (PD) is connected to the port.
The connected device is receiving power.
Abnormal power supply
The system has reached a total power output of 200 W.
The PoE total is nearing its maximum level of 250 W.
Power Off
Power On

Publicidad

loading

Este manual también es adecuado para:

Ips-16g02-250w