Work Pro W DUO DIM Manual De Uso página 9

2. Operation Guide
DMX
Circuit A
CircuitB
MENU
DMX
Circuit A
CircuitB
MENU
NOTE: In Switch Off mode, the output is controlled by DMX signal
or the encoder adjustment. It c
takes precedence).
In Switch On mode, the output is constantly on, DMX signal and the
encoder adjustment are not applicable.
END-TRIM Enable
END-TRIM function mode:
The unit offers180 /145 Dimming function mode for user's application. The default
setting is 180 . You should get the authorized personal for help to change the
setting.
NOTE:
If the function pushbuttons are not used for approximately 20 seconds, the screen
will alternatively display DMX address of two circuits for your.
DUO DIM
4. Use the Up/Down button to select the desired value from
10% to 100%.
5. When the LED display shows "S---", press the MENU
button to enter the Switch on or off setting.
6. And use the Up/Down button to select the Switch on or
Switch off.
User Manual/Manual de uso
omplies with HTP principle(Highes
Pag. 8