Singer SVCB 4216 ECO Guia Del Usuario página 6

This vacuum cleaner is equipped with a plug and a cable, which rolls up
automatically.
If anything gets damaged, both the plug and the cable must been repaired by a
qualified repairman or electrician.
ASSEMBLING VACUUM CLEANER
Always remove the plug from the power socket before fitting or removing
accessories!
1. Connecting vacuum cleaner
- Fitting or removing the flexible hose
Fitting:
Insert flexible hose into the air intake duct on the front of appliance. Press until it clicks
into position.
Removing:
Removing the plug from the power socket. To release the flexible hose firmly from the air
intake duct.
- Fitting the extension tubes and accessories
a. Fitting the extension tube to the handle.
b. Fitting the extension tubes.
c. Fitting the brush to the extension tube.
4