Work Pro W WAP 850 Instrucciones De Usuario página 15

How to use the handheld Microphone
1. Open the battery cover.
2. Put the battery into the compartment and make sure you have a right
polarity before you use it.
3. Turn the switch to ON and you can use the microphone now.
4. Please take the battery out if you are not going to use it for a period of
time.
If the LED flash up, it shows the battery is good to use.
Caution:
If the LED is on, it shows that the battery is low, you have
to change the battery before you can use the system. If
the LED does not flash and not on,it shows the battery
is dead or polarities are wrong.
Indicator
MIC.net head
Handheld wireless MIC
How to use a wired microphone
Just plug the microphone to the wired mic input
jack, you hear your voice immediately. Total 2
wired microphone input jacks. You can use 2
wired microphones at the same time.
How to adjust the Tone control volume
You may turn the Tone knob to its best position to adjust its Tone volume
to your satisfactory.
How to use the digital echo
You may turn the ECHO knob to its best position for your satisfactory. If
you hear the screaming sound, adjust the ECHO knob in less volume to
its perfect sound.
9V Battery
Holder
Battery
Switch
chamber
Battery cover
Close
Open
Don't put the microphone directly towards
the horn of the main receiver in near distance,
or it will occur screaming feedback.
PAG. 14 User Manual/Manual de Instrucciones
EN
WAP 850