Work Pro W PA 50 Instrucciones De Usuario página 3

HANDLING THIS UNIT
Check if the power supply is being shut down, the power line is pulled out
from outlet and other lines connecting this unit are also disconnected.
DON'T DISASSEMBLE THIS UNIT
Don't disassemble and repair the unit by yourself, otherwise if may induce electric
shock or fires. If you can't remedy any occurred trouble according to the
methods described in the Last of this manual, you must call a qualified tecnician
or consult with our company. A forced using could cause electric shock or fire.
SPECIFICATIONS:
Microphone Sensitivity: -55dB
AUX Sensitivity: -20dB
OUTPUT POWER : 36W at 4W load
FREQUENCY RESPONSES : 100Hz-18KHz 3dB
DISTORTION : less than 1% (at 1KHz 1watts output)
Signal/Noise Ratio : More than-55dB
Hum or Noise level : 50mV
Tone Control Response :150HZ
Puncture Voltage at 5mA, 5Sec : 3750V
Speaker outputs : 4, 8, 16ohms 100V
Dimensions : 320 (W) * 190 (D) * 80 (H) mm
Weight : 5Kgs
PA 50
User Manual/Manual de uso
2dB
2dB
10dB; 1K
- 2 -
10dB; 6K 10dB
EN