Mark BEAM 195 Instrucciones De Usuario página 10

EN
09. Channel data:
* When connected with a DMX controller, the channel value can not be
changed, only show channel DMX value. While there is no DMX controllers,
you can control the fixture by this item, select some channel, roll the
encoder wheel to adjust DMX value
09. Display:
1. Language
* English
2. Backlight time:
*Open(always on ), 30 seconds
3. Back-brightness:
* 1 -4, from dark to bright
4. Exit:
BEAM 195
:
User Manual/Manual de uso Page 8