Work Pro W MD 82 AX Manual De Uso página 10

EN
DATA HEAD
To adjust the HPF to minimum
To adjust the HPF to maximum
NOTE 1-
The "channel number" byte indicates the channel operated, in that case, 00 is channel 1, 01 channel 2, 02 channel 3, 03 xhannel 4, 04, channel 5, 05, channel 6, 06 channel 7, 07 channel 8.
Number upon this value, always operates over the MASTER
NOTA 2-
El byte de "Parameter Range" indicate theHPF adjustment value from 20 Hz (min) to 130 Hz (max.)
DATA HEAD
To adjust the LPF to minimum
To adjust the LPF to maximum
NOTE 1-
The "channel number" byte indicates the channel operated, in that case, 00 is channel 1, 01 channel 2, 02 channel 3, 03 xhannel 4, 04, channel 5, 05, channel 6, 06 channel 7, 07 channel 8.
Number upon this value, always operates over the MASTER
NOTA 2-
El byte de "Parameter Range" indicate the HPF adjustment value from 6000 Hz (min) to 16000 Hz (max.)
DATA HEAD
To adjust the Feedback to minimum
To adjust the Fdeedback to maximum
NOTE 1-
The "channel number" byte indicates the channel operated, in that case, 00 is channel 1, 01 channel 2, 02 channel 3, 03 xhannel 4, 04, channel 5, 05, channel 6, 06 channel 7, 07 channel 8.
Number upon this value, always operates over the MASTER
NOTA 2-
El byte de "Parameter Range" indicate the Feedback adjustment value from OFF (min) to 04 (max.)
PARITY bit Channel Number
FE 0D 00
from CH1 to 8 physic
FE 0D 00
PARITY bit Channel Number
FE 0D 00
from CH1 to 8 physic
FE 0D 00
PARITY bit Channel Number
FE 0D 00
From CH1 to 8 physic
FE 0D 00
9
HPF ADJUSTMENT
ID Number Empty Parameter Range
06 00 00
HPF 20 Hz
06 00 3f (130 in decimal )
130 Hz
LPF ADJUSTMENT
ID Number Empty Parameter Range
07 00 00
LPF 6000Hz
07 00 64(100 in decimal )
16000Hz
Feedback ADJUSTMENT
ID Number Empty Parameter Range
08 00 00
FeedBack OFF
00 00 04
User Manual / Manual de uso
Empty Empty Empty
00 00 00
00 00 00
Empty Empty Empty
00 00 00
00 00 00
Empty Empty Empty
00 00 00
00 00 00
MD 82 AX
Data Tail
FF
FF
Data Tail
FF
FF
Data Tail
FF
FF