Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions for Sure_Lites AP2SQLED Series LED Emergency Light
Warning:
Unused wires must be capped using enclosed wire nuts.
Operation
1.
During an electrical power failure, the LED lamps will
automatically come on for a minimum of 90 minutes.
2.
To test, depress the "TEST" switch. The emergency
LED lamps will illuminate. When the switch is released,
the lamps will go off.
Wiring diagram
Use 18-22 AWG stranded wire to connect remote
N
ote:
lamp heads.
Unused input lead must be properly insulated with
N
ote:
wire nut or other approved method.
CHARGER
BOARD
AC INPUT CONNECTOR
(MOUNTING PLATE)
RED
277V
BLACK
120V
WHITE
0V
YELLOW(+)
BLUE(-)
YELLOW(+)
BLUE(-)
LAMP
LAMP
READY
Regular
Note:
Unused input lead must
be properly insulated with
wire nut or other approved
method.
RED
BLACK
TEST
BATTERY
COOPER LIGHTING SOLUTIONS
IB50519821
Installation instructions
3
Publicidad
