Mitsubishi Electric Mr.SLIM PKA-RP HAL Serie Manual De Instrucciones página 10

Timer Setting
Hr ON
AFTER
1. Be sure that you are at a standard control screen, and that the simple
timer indicator is visible in the display (at
When something other than the Simple Timer is displayed, set it to
SIMPLE TIMER using the function selection of remote controller (see
8.[3] (3)) timer function setting.
2. Press the Timer Menu button
screen (at ). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the ON/OFF button
timer setting. Press the button once to display the time remaining to
ON, and then again to display the time remaining to OFF. (The ON/
OFF indication appears at ).
• "ON" timer:
hours has elapsed.
• "OFF" timer:
hours has elapsed.
4. With "ON" or "OFF" showing at
ton as necessary to set the hours to ON (if "ON" is displayed) or the
hours to OFF (if "OFF" is displayed) at
• Available Range: 1 to 72 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF
setting(see step 3) and then press the Check (Clear) button
the time setting clears to "—" at
ting or only an OFF setting, be sure that the setting you do not wish to
use is shown as "—".)
7. After completing steps 3 to 6 above, press the Filter
in the value.
Note:
8. Press the Mode (Return) button
screen.
9. Press the Timer On/Off button
the timer is running, the timer value is visible on the display. Be sure
Timer Setting
TIMER Hr
AFTER
1. Be sure that the simple timer indicator is visible on the screen (at
2. Press the Timer Menu button
screen (at ).
• If the ON or OFF simple timer is running, the current timer value will
appear at .
• If ON and OFF values have both been set, the two values appear
alternately.
3. Press the Mode (Return) button
return to the standard control screen.
10
Action (On or Off)
* "— —" is displayed if there is no
setting.
SIMPLE
).
, so that the "Set Up" appears on the
to display the current ON or OFF simple
: Press the appropriate Set Time but-
.
. (If you want to use only an ON set-
button
.
to return to the standard control
to start the timer countdown. When
ON
OFF
SIMPLE
, so that the "Monitor" appears on the
to close the monitor display and
Press the Timer On/Off button
pears on the screen (at
Press the Timer On/Off button
visible at .
If ON and OFF times have both been set at the simple timer, operation
and display are as indicated below.
Example 1:
Start the timer with ON time set earlier than OFF time
ON Setting:
OFF Setting:
so that
C
to lock
Example 2:
Start the timer with OFF time set earlier than ON time
ON Setting:
OFF Setting:
C
).
C
so that the timer setting no longer ap-
).
C
C
SIMPLE
so that the timer setting becomes
Hr ON
AFTER
C
C
SIMPLE
3 hours
7 hours
Hr ON
AFTER
At Timer Start
Display shows the timer's ON setting (hours
SIMPLE
remaining to ON).
Hr
At 3 hours after timer start
AFTER OFF
C
Display changes to show the timer's OFF set-
ting (hours remaining to OFF).
SIMPLE
The time displayed is OFF setting (7 hours) –
ON setting (3 hours) = 4 hours.
At 7 hours after timer start
The air conditioner goes off, and will remain
SIMPLE
off until it is restarted.
5 hours
2 hours
Hr
AFTER OFF
At Timer Start
C
Display shows the timer's OFF setting (hours
SIMPLE
remaining to OFF).
At 2 hours after timer start
Hr ON
AFTER
Display changes to show the timer's ON set-
ting (hours remaining to ON).
SIMPLE
The time displayed is ON setting (5 hours) –
OFF setting (2 hours) = 3 hours.
At 5 hours after timer start
C
The air conditioner comes on and will con-
SIMPLE
tinue to run until it is turned off.