Publicidad
Idiomas disponibles
Idiomas disponibles
7. Screw on the wing nuts until the castor plates are securely in
place.
8. Return the heater to its upright position.
OPERATION
The heater carries a symbol
if the heater is accidentally covered.
1. Place the heater on the stable level surface.
2. Open the power cord storage box to remove the power cord.
3. Plug in the heater and press
The power indicator will illuminate.
4. Press the power level button.
You will hear a beep.
The default set temperature is 24°C and the power setting is high level.
5. Power setting
Repeatedly press the power level button to select the desired level. The corresponding indicator(s)
will illuminate.
6. Temperature Setting ( 5°C ~ 30°C )
Repeatedly touch
or
NOTE : You can also touch and hold
displayed, release the button
7. Timer Setting
a. Setting timer to turn off the heater
Lock the castor plates to the heater with
wing nuts
'DO NOT COVER' to alert the user to the risk of overheating that exists
.
to select the required temperature.
or
for fast setting. When the required temperature is
or
.
EN-7
Publicidad
