Publicidad
Idiomas disponibles
Idiomas disponibles
1) When the heater is in operation, press and hold the Timer / Temperature button for about 2
seconds.
You will hear a beep and the display will show "00h".
2) Repeatedly press
NOTE : You can also touch and hold
displayed, release the button
3) When the set time has elapsed, the heater will turn off.
b. Setting timer to turn off and then turn on the heater
1) When the heater is in operation, press and hold the Timer / Temperature button for about 2
seconds.
You will hear a beep and the display will show "00h".
2) Repeatedly press
NOTE : You can also touch and hold
displayed, release the button
3) Press and hold the Timer / Temperature button for about 2 seconds.
You will hear a beep and the display will show "00H".
4) Repeatedly press
NOTE : You can also touch and hold
displayed, release the button
5) When the timer is set, the power level indicators will flash.
6) When the set time has elapsed, the heater will turn off and then turn on.
To cancel the timer function
Press and hold the Timer / Temperature button for about 2 seconds.
Repeatedly press
or
8. To check ambient temperature, press the Timer / Temperature button.
Anti-freeze function
In standby state, the heater will automatically turn on when the ambient temperature falls below 5°C.
or
to select the desired time from 1 to 24 hours.
or
or
or
to select the desired time from 1 to 24 hours.
or
or
or
to select the desired time from 1 to 24 hours.
or
or
until the display shows "00h" or "00H".
EN-8
for fast setting. When the required time is
.
for fast setting. When the required time is
.
for fast setting. When the required time is
.
Publicidad
