UNIPRODO UNI HEATER 11 Manual De Instrucciones página 20

3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum distance of 1 m from each wall of the unit. Keep the unit away from any
hot and humid surfaces. Always operate the unit on a stable, clean, fireproof and
dry surface and out of the reach of children and persons with impaired mental,
sensory and intellectual functions. It is forbidden to use the device in the immediate
vicinity of bathtubs, showers, swimming pools! Place the unit in such a way that the
mains plug can be reached at any time. Ensure that the power supply to the unit
corresponds to that specified on the identification plate!
ASSEMBLY OF THE DEVICE
The device itself does not require assembly, only the transparent protective insert
of the battery needs to be removed from the control panel. Grasp its protruding end
(1) at the bottom of the remote control and pull it out completely (2):
3.3.
Working with the device
NOTE: the device can be controlled both from the control panel and the remote
control - both have the same set of buttons:
1) Connect the device to the power supply.