Publicidad
Idiomas disponibles
Idiomas disponibles
▪ Create a separate power connection for the sound system. Use a fuse/
circuit breaker as close to the battery as possible for protection.
▪ Make a good grounding for the amplifier. To do this, remove the paint
from the vehicle chassis at the desired point. Attach the wire using a ground
terminal. To prevent oxidation, isolate with paint.
▪ Do not loop the ground. Avoid using multiple grounds. If possible, use a
star connection, so all the grounds run from a single point.
The data measured are based on STETSOM laboratory equipment. Test reference
in frequency from 60hz to 1Khz with THD + N at ≤1% in impedances as indicated in
each measurement. The electronic components and the manufacturing process may
present manufacturing variations, thus leading to a variation in the measurements
made.
Any updates made in this manual will be available for customers to consult free of
charge on the brand's site.
It is recommended that the updated manual be consulted whenever needed.
Images contained in this manual are merely illustrative and may differ from the actual product.
9
Publicidad
