Silvercrest SDBSB 3000 A1 Instrucciones De Uso página 18

5) While ironing, press and hold the steam button
steam from the soleplate
6) Release the steam button
Fig. 9
NOTE
► When you press the steam button
comes out of the soleplate
7) After ironing, place the iron on the stand
temperature control
8) Press the On/Off button
The On/Off control lamp
medium
9) Pull the plug out of the mains socket.
Vertical steam ironing
1) Hang the piece of fabric you want to iron on a clothes hanger hanging from
a heat-resistant surface.
2) Press the On/Off button
lamp
3) Turn the temperature control
perature control
Wait until the heat-up indicator lamp
4) Press the
–
If the steam control lamp high
produced.
SDBSB 3000 A1
8
2
8
3
to min.
e
r
u i
/low (depending on the setting) go out.
e
r
lights up blue and the steam control lamp low
3
must be set within the
+ ‒
o
or the button
2
onto the items being ironed (see fig. 9).
to stop producing steam.
2
, it can take a few seconds until steam
.
6
of the base station and set the
for about 2 seconds to switch on the appliance.
and the steam control lamp high
to switch on the appliance. The On/Off control
3
to the desired ironing temperature. The tem-
range to produce steam.
1
goes out.
p
to set the desired steam strength:
z
lights up, a large quantity of steam is
to continuously spray
z
/
i
flashes blue.
GB │ IE │
15 ■