Publicidad
Idiomas disponibles
Idiomas disponibles
1 ABOUT THIS DOCUMENT
1.1 DOCUMENT TARGET GROUPS
This document was developed for professionals with suitable technical qualification or training to operate this
kind of product. For some gateway configuration steps, it will be necessary the support of an IT professional, if
the user is not one.
The manual contains the necessary information for the correct installation, setup and operation of the Cassia
X2000 gateway together with the WEG Motor Scan sensors (smart monitoring device for motor characteristics).
The user must follow all instructions contained in this manual and defined by local technical standards. Having
basic knowledge of wireless networks will be an advantage in the implantation of this product.
For advanced configurations and projects, contact our Customer Service.
1.2 ABBREVIATIONS AND DEFINITIONS
Sensor: In this manual, the term "sensor" refers to the WEG Motor Scan device - smart device to monitor motor
characteristics.
IoT (Internet of Things): It is defined as the technology that allows machine-to-machine (M2M) communication
over the internet for the sharing of data and information for predefined purposes.
Gateway: Intermediate equipment that uses internet resources to connect the Sensor to the WEG Motion Fleet
Management. In this manual, the term "gateway" refers to the Gateway X2000 device.
Bluetooth: Wireless technology that interconnects and allows the transmission of data between computers, mobile
phones and other devices through radio waves.
Ethernet: Ethernet is an interconnect architecture for local area networks - Local Area Network (LAN).
PoE: It is the abbreviation for Power Over Ethernet, which is a technology that allows the transmission of electricity
through the cables of an Ethernet network.
Hotspot: It is the name of a particular place where a wireless network (Wi-Fi technology) is available for use.
Firmware: It is the set of operating instructions programmed directly into the hardware of an electronic device. It
contains the initialization information that allows the device to function properly.
1.3 SAFETY WARNINGS
The following safety notices are used in this manual:
DANGER!
Failure to comply with the procedures recommended in this warning may lead to death, serious
injuries and considerable material damages. It may also void the warranty.
ATTENTION!
Not following the procedures recommended in this warning may cause material damages.
NOTE!
Important information for the complete understanding and proper operation of the product.
About This Document
Gateway Cassia X2000 | 6
Publicidad
