Descargar Imprimir esta página

IPC PW-E100 Manual De Instrucciones página 114

Hidrolimpiadora por agua caliente
Ocultar thumbs Ver también para PW-E100:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 143
TABLE OF ROUTINE MAINTENANCE TO BE PER-
FORMED BY THE USER
Description of operations:
Check power cable - pipes - high pressure
connectors
Ist oil change in H.P. pump
Subsequent changes in H.P. pump
Clean water filter
These intervals refer to normal working conditions. For heavy duty use decrease the interval for each job.
For maintenance and/or repairs, use only original spare parts which offer the greatest characteristics of quality and
reliability. Failure to use original spare parts absolves the manufacturer from all liability and transfers it to the person
If the machine is to remain inactive for a long period, disconnect the supply sources, drain the tank(s) of all the operating fluids
and protect any parts that could be damaged by the accumulation of dust.
Grease the parts that could be damaged by drying out, such as the supply hoses. When bringing back into use, ensure that
there are no cracks or cuts in the water supply hoses.
Oil and chemical products must be disposed of according to current legislation.
If you no longer wish to use the water cleaner, you should render it unusable by removing the power cable.
You should also make sure that all potentially hazardous parts of the appliance are made safe, particularly for children who could
play with the unused water cleaner.
This product is classified as WEEE type special waste and is covered by the requisites of the new environmental protection
regulations. It must be disposed of separately from ordinary waste in compliance with current legislation and standards.
Do not use parts dismantled for scrap as spare parts.
English
TABLE OF
BE PERFORMED BY THE TECHNICAL SERVICE
CENTRE
Description of operations:
Boiler:
Each use
Maintenance
Change seals on H.P. pump
Change lanze nozzle
After 50 hours
Calibrate and check the safety devices
Every 500 hours
Every 50 hours
IMPORTANT:
carrying out the operation.
PERIODS OF INACTIVITY
SCRAPPING
- 26 -
EXTRAORDINARY MAINTENANCE
TO
Every 200 hours
Every 500 hours
Every 200 hours
Once a year

Publicidad

loading

Este manual también es adecuado para:

D1710p 12 tD 1712p 24D 1712p 36 t