Publicidad
Idiomas disponibles
Idiomas disponibles
Using With the Clamp
The highly versatile clamp easily attaches to a variety of surfaces to
improve the utility of the tool, such as for use when mounted on a
water pipe, banister, edge of table, etc.
Mount the tool to the 1/4" screw platform on the clamp and secure
the clamp to a pole, pipe or other suitable item (FIG.4).
Fig. 4
NOTE: Either of the mounting holes on top and bottom side of the
tool may be mounted to the 1/4" screw platform of the clamp. (FIG.4)
Loosen the knob. Adjust the 1/4" screw platform to the desired
position and adjust the orientation of the rod so that the laser beam
projects to your target. After adjustment, tighten knob. (FIG.5)
Fig. 5
16
Publicidad
