Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
STEP # 3
• Assemble the rear right tube (D) with the inner right body (B) as shown. Make sure you assemble
right with right.
• Attach the inner right body using (1) M8 x 30 SEMS bolt. Do not fully tighten the bolt, leave loose
for final adjustments
STEP # 4
• Assemble the rear left tube (E) with the inner left body (C) as shown. Make sure you assemble
left with left.
• Attach the inner right body using (1) M8 x 30 SEMS bolt. Do not fully tighten the bolt, leave loose
for final adjustments
REV.01
B
D
© 2016 Go Rhino Products. All rights reserved
P
P
5
Publicidad
