the combustion exhaust of gas water heaters.
• The device shall discharge to a single barrel of exhalation or directly outside.
• The installation can be performed either on the wall or ceiling.
• In compliance with current regulations on accident prevention, ensure that the appliance
is installed with the impeller on the pressure side, inaccessible.
• The device is not intended for use by persons (including children) with reduced physical,
sensory or mental capacities, or lack of experience or knowledge, unless they have been
given, through the intermediary of a responsible person their safety, supervision or
instruction concerning use of the device.
• Children should be supervised to ensure that they do not play with the device.
MAINTENANCE AND SERVICE:
• Before carrying out any maintenance, ensure the pwer is switched OFF from the mains
power supply.
• Wipe down the cover and grilles with a wet soapy cloth only. Never use petrol, benzene,
thinner or any other such chemicals for cleaning the ventilating fan.
• Do not allow water to contact electrical part, such as motor.
• Do not immerse resin parts into water over 60° C and do not place hot objects near or
install nearby hot appliances.
MODELS
Cod. 50958 – 50966 – 50967 – 50968: This model is operated by switching it on by
means of the power switch.