Home Decorators Collection GREENHAVEN 56006 Guía De Uso Y Mantenimiento página 9

Assembly - Hanging the Fan (continued)
2
Hanging the fan
□
Carefully lift the fan motor assembly (E) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly (B)
into the socket of the slide-on mounting bracket (A).
□
Turn the ball/downrod assembly (B) clockwise until it is
seated with the tab of the slide-on mounting bracket (A)
aligned with the slot in the ball.
3
Installing the receiver
WARNING: To reduce the risk of fire or electric shock,
remember to disconnect power. The electrical wiring
must meet all local and national electrical code
requirements. The electrical source and fan must
be 110/120 volts, 60Hz. Do not use this product in
conjunction with any variable wall control. Incorrect
wire connection can damage this receiver.
CAUTION: If other fan wires are a different color, have
this unit installed by a licensed electrician.
□
Position the house supply wires to one side of the
slide-on mounting bracket (A). Position the fan wires
to the opposite side.
□
Insert the narrow end of the receiver (K) (as shown,
flat side towards the ceiling) into the slide-on
mounting bracket (A) until it rests on top of the ball/
downrod assembly (B).
A
B
9
Please contact 1-877-592-5233 for further assistance.
A
B
E
K
HOMEDEPOT.COM/HUBSPACE