Technical Data - simalube IMPULSE Manual Del Usuario

EN

3. Technical data

e
d
c
a
b
mm inch
a G¼''
b
Ø 60 Ø 2,36
c 10 0,39
d 75 2,95
e 130 5,12
f 169 6,65
g 262 10,31
g
simalube IMPULSE
®
Drive system
Power supply
Function display
f
Dispensing volume
Working pressure
Operating
temperature
Time setting
Lubrication rate
Lubricator volume
Lubricant
Installation position
Connection thread
Housing dimen-
sions
Weight
Protection rating
Warranty &
period of use
Storage
Please refer to the simalube user manual for information
regarding dispensing volume, setting the dispensing time
and temperature compensation. An online calculation
program (simalube/Calculation Pro) and an online
lubrication chart (simalube/LubeChart) are available
at www.simatec.com.
* The battery pack must be replaced every time the
lubricator is replaced.
Automatic pressure booster
for the simalube lubricator
Electromechanical
Battery pack* 6 V 2.3 Ah
LED status display – green/red
every 10 seconds
Approx. 0.5 ml per stroke
(Impulse)
up to 10 bar
–10 °C to +55 °C (14 °F to 131 °F)
1 to 12 months – determined
by the setting on the simalube
Depends on the size and
settings of the simalube:
0.17 to 8.3 ml/day
60 ml, 125 ml, 250 ml
Greases up to NLGI 2 or oils
Any
G ¼"
(with integrated non-return valve)
Ø 60 × 85 mm
(PET semitransparent)
0.24 kg
IP68 (dust and water resistant)
3 years from the production date
or until 10 simalube lubricators
(125 ml) have been emptied
Recommended at +20 °C
(+/–5 °C)/+68 °F (+/–41°F).
Protect against sunlight and store
in a dry place (<65 % humidity)
13
IMPULSE