Publicidad
Idiomas disponibles
Idiomas disponibles
Preface
Thank you for buying the MID. We wish you enjoy using it.
Please read and retain all the operating instructions before operating the unit, we do
not assume any liability arising out of improper operation or incidental damages.
For better services, the content of this operation manual may be changed.
If the actual setup and usage of the unit are different from this operation manual,
please view the website of our company to inquire about the latest product
information.
Do not allow water or foreign objects to enter the unit.
Note:
1.
Avoid the unit being dropped. Avoid the display been shake seriously, or the
display will be damaged or unusual.
2.
Do not use metal object to touch the device to prevent it from short circuit.
3.
Please backup your data in case your important data is lost, especially before you
upgrade the firmware. The company will not take charge in any loss that caused
by lost of data.
4.
Do not disassemble. Do not wipe the surface of the unit by alcohol, thinner or
benzene.
5.
Do not disconnect the unit while it is formatting or uploading/downloading, or the
procedures may lead to errors
6.
We do not take responsibility to the flash damage caused by product broken,
repair or other reasons. Please operate strictly as per the user guide.
7.
Avoid water or foreign objects enter the unit.
8.
Do not use the unit in places that are extremely hot, cold, dusty, or humid.
9.
Avoid the unit being dropped. Avoid the display been shake seriously, or the
display will be damaged or unusual.
10. Specifications are subject to change and improvement without notice
1. Basic Operation
1.1. Power on/Power off
Power on:
Press and hold the power switch for 5 seconds; the unit displays the start-up logo
and enters the working mode.
Power off:
Press and hold the power switch for 3 seconds to turn the unit off.
Sleep:
While the device is at working status, press the power switch, it enters the sleeping
mode, and the screen will be off then. Press the power switch again, it shift to the
normal mode. You may use this function when you don't' use the device temporary
to save power.
1.2. Charging
When the device prompts low battery, please charge it by provided charger.
Note:
To improve the longevity of the battery, you may charge for another 15
11
Publicidad
