Publicidad
Idiomas disponibles
Idiomas disponibles
Pipe Tape
INSTALLATION PROCEDURE - TBW01026U, TBW01027U
Handshower Hose
INSTALLATION PROCEDURE - TBW02013U, TBW01014U
Wall Outlet
NOTE: The hole for the nipple should not be
larger than 1" (25mm) in diameter.
Seal wall opening around 1/2" nipple with caulk.
Wrap the threads of the nipple with pipe tape.
Thread the wall outlet on by hand until the
outlet points straight down and has made
contact with the wall.
A screwdriver may be inserted into the outlet
hole to provide extra leverage while tightening.
COMMON TOOLS NEEDED
Adjustable
Screwdriver
Wrench
The distance of the component buried in
wall from the wall surface is 0-1/4" (0-6mm)
Handshower
Gasket
Conical Nut
Handshower
Hose
3
Drill
1/4"or 3/32"
Drill Bit
Wall
Outlet
Gasket
Finished
Wall Surface
Nipple NPT1/2
Wall Outlet
Pipe Tape
Finished
Wall Surface
Elbow
Publicidad
