Publicidad
instal_S(C)13xx.qxd
06-05-2010
CAUTION
• Ensure that the space around the left and right of the indoor unit is more than 12cm.
The indoor unit should be installed allowing a minimum clearance of 15cm from the ceiling.
• Use a stud finder to locate studs to prevent unnecessary damage to the wall.
• The indoor unit should be installed on the wall at a height of 2.3 metres or more from the
floor.
• At least two of the directions A, B and C should be free from obstructions.
ATTENTION
This illustration is for explanation and indication purposes only. The illustration may be different
from the airconditioner you purchased.
ATTENTION
Copper lines must be insulated independently from each other.
INDOOR UNIT INSTALLATION
1. Fit the installation plate
1.
Fit the installation plate
tion plate.
2.
If the wall is made of brick, concrete or the like, drill eight (8) 5 mm diameter holes in the wall. Insert
Clip anchor
3.
Fit the installation plate
NOTE
Fit the Installation Plate and drill holes in the wall according to the wall structure and
corresponding mounting points on the installation plate. (Dimensions are in "mm" unless
otherwise stated)
4
68
11:41
Pagina 68
Correct orientation
of Installation Plate
horizontally on structural parts of the wall with spaces around the installa-
for appropriate mounting screws
on the wall with eight (8) type "A" screws
.
.
Publicidad
