SATYCON UNI100 Manual De Instrucciones página 6

TODO en 1/ALL in One: UNI100­UNI600
INSTRUCTION BOOKLET
Description
1. codes:
Bank For Device
TV TV/CTV/TXT
VCR VCR
CBL / SAT Cable /Satellite
AUX CD/LD/DVD/VCD/AMP/HIF1
2. Default Code After Powered ON:
Device
TV1
TV2
VCR1
VCR2
SAT
DVD
AUX1
AUX2
CBL
Code Set Up
1. Set up By Device Brand Code:
According to the attached Device Brand Code List, find out the device brand name and code of the device
that you want to control(For example, you can find codes for "philips"TV:001,004,023 etc),Then follow steps
as below:
E. Press the [SET] key and hold it,then press the device key that you want to control,such
as[TV1],[VCR],etc.
F. The LED will be on at the moment.
Then release the pressed both keys.
G. Enter in the 3-digit Device Code.(For example: code 001 for Philips TV).
H. If the entered Device Code is correct,the LED will be turn off and quit form the setup status. If the
code number is not in the list, the LED will flash twice and keep being at setup mode (being on),Then
please return to step C.
I. Try if keys on Remote Control work or not. If most keys work improperly, please try other code under
the same brand (For example: code 004,023......under Philips TV),repeat A～E Till you find the main
keys work good enough.
Remark:
A. In the process of setup ,if you want to quit from set up mode, please press the device key.
B. If no key is pressed in 10 seconds the remote control will leave the setup mode automatically.
www.satycon.com
Total
Codes
299
107
237
158
Lint . Code
027
075
278
284
424
658
552
675
521
of Quick
search
000-268;700-729
269-370;750-754
371-523;800-883
524-681
Brand
Philips TV
TelefunkenTV
Philips VCR
Grundig VCR
Philips Satellite
Pioneer DVD
Philips CD
Philips DVD
GMI-909 Cable
Página 6