Commissioning, Operation - WIKA T53.10 Manual De Instrucciones

6. Commissioning, operation

6. Commissioning, operation
6.1 Mounting
The Model T53.10 transmitters are designed to be mounted on a
GB
measuring insert in a Form B DIN connection head.
The connection wires of the measuring insert must be approx.
50 mm long and insulated.
Mounting example:
Mounting in connection head
Insert the measuring insert with the mounted transmitter into the
protective sheath and secure into the connecting head using screws
in pressure springs.
Mounting of sensor wires
Wires must be mounted
between the metal plates.
18 WIKA Operating Instructions Temperature Transmitter T53