Publicidad
Idiomas disponibles
Idiomas disponibles
If you are attaching the anti-tip strap to wood furniture:
1.
Locate a secure area near the top of the furniture that is at least 26 mm (1 in.) thick.
2.
Drill pilot hole to a depth of 26 mm (1 in.) using a 2.4 mm (3/32 in.) diameter drill bit.
3.
Place the mounting plate
CAUTION: To avoid potential injuries or property damage!
P
1.
Ensure mounting plate
S
2.
Ensure all straps
are tight.
P
over the drilled hole on the back of the furniture. Insert and tighten screw
is securely fastened to the furniture.
11
.
P
S
11
S
STEP 2-B
9
Publicidad
