Installation
3. Undo the screws holding the upper
hinge in position and then remove the
Fig.13
Fig.14
hinge(Fig.13).
4. Lift the door to remove it (Fig.14).
When removing the freezer door, Iift
it high enough to pull out the water
connection from the bottom of the
appliance.
EN
5. Refit the door by reversing the re-
moval steps. Ensure that the grounding
cable will be fixed by the screw.
6. Refit the water connection .
NOTICE:
Fridge door
The pictures show the removing of the freezer compartment door . For the fridge
door please use the corresponding parts on the other side .
40