Publicidad
Idiomas disponibles
Idiomas disponibles
3. The keypad is used to select or deselect options.
Start Operating Setup
NOTE: Prior to operation, a payment system or an OPL kit must
be installed on PD models as part of the setup.
Before proceeding, it is worth noting that, despite all of the
options available, an owner can simply choose to uncrate a new
commercial washer, hook it up, plug it in, and have a washer that
operates. Washers are preset at the factory for an 11-minutes
wash period and 3 rinses (no extra rinse).
Setup Codes
The keypad will advance you from code to code.
■
The keypad will change the code value.
■
The keypad will select or deselect options.
■
FOR PN/PR MODELS: The set-up codes are the same as for the
"PD" model except where noted.
The set-up code is indicated by the 1 or 2 left-hand characters.
The set-up code value is indicated by the 2 or 3 right-hand
characters. The first code shown in each section is the Factory
Default setting.
CODE
6 07
REGULAR CYCLE PRICE (Factory Default)
6
07
Represents the number of coins (Coin 1) needed
to start the washer; may adjust from 0–39. (See
VALUE OF COIN 1.) Advance from 0–39 by
pressing keypad. Factory default
of 7 x coin 1.
With coin slide activation, this code represents
the number of push-in actuations of a coin slide
to start the washer.
6 01 setting would represent one coin slide
actuation.
NOTE: For coin slide activation, replacement
of the meter case is necessary.
6
00
PN/PR MODELS ONLY: Factory default of 0 coins.
g
Press the keypad once to advance to next code.
7 11
WASH LENGTH
7 11
This is the number of minutes for Wash. Washer
comes from the factory preset with 11 minutes.
Choose from 9–17 minutes by pressing the
keypad.
g
Press the keypad once to advance to next code.
NOTE: This option does not apply.
8 00
ADDITIONAL RINSE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
8
00
Not Selected 'OFF'.
8
Ar
Selected 'ON'. Cannot be combined with the
Super Cycle rinse option.
Press the keypad once for this selection.
g
Press the keypad once to advance to next code.
16
EXPLANATION
CODE
9 00
CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
9
00
Not Selected 'OFF'.
9
0C
Selected 'ON' and not able to be deselected.
Press the keypad 3 consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
Press the keypad once to advance to next
g
code.
MONEY COUNTER OPTION
1. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
1.
00
Not Selected 'OFF'.
1.
0C
Selected 'ON'.
Press the keypad 3 consecutive times to select
'ON' and 3 consecutive times to remove (Not
Selected 'OFF'.) Counter resets by going from
'OFF' to 'ON'.
Press the keypad once to advance to next
g
code.
1.
C0
Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
the keypad twice, and exit the set-up mode.
2. 00
SPECIAL PRICING OPTIONS
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
2.
00
Not Selected 'OFF', and next available code will
be A.00.
2.
SP
Selected 'ON'. Press the keypad once for this
selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes '3.XX' through '9.XX'.
g Press the keypad once to advance to next code.
Options to use if SPECIAL PRICING is selected:
3. 07
SPECIAL CYCLE PRICE
3.
07
Represents the number of coins (coin 1) needed
to start the washer; may adjust from 0–39. (See
VALUE OF COIN 1.) Advance from 0–39 by
pressing the keypad. Factory default of
7 x coin 1.
3.
00
PN/PR MODELS ONLY: Factory default of 0 coins.
g
Press the keypad once to advance to next code.
5. 00
TIME-OF-DAY CLOCK, MINUTES
5. 00
This is the Time-of-Day Clock, minute setting;
select 0–59 minutes by pressing the keypad.
g
Press the keypad once to advance to next code.
6. 00
TIME-OF-DAY CLOCK, HOURS
NOTE: Uses the 24-hours clock
6. 00
This is the Time-of-Day ClockK, hour setting;
select 0–23 hours by pressing the keypad.
g
Press the keypad once to advance to next code.
EXPLANATION
Publicidad
