• Use only for domestic purposes according to the instruction manual. It is not intended for industrial use
• For indoor use only
• Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety
• During storage, make sure there are no objects on the scales
• Do not lubricate the internal mechanisms of the scales
• Keep the scales in a dry place
• Do not overload the scales
• Carefully put products on the scales, don‟t hit the surface
• Protect the scales against direct sunlight, high temperatures, humidity and dust
BEFORE FIRST USE
• Please unpack your appliance. Remove all packing materials
• Wipe the surface with a damp cloth and detergent
USING THE DEVICE
START WORK
• Open the battery compartment lid and install one battery CR2032 type, observing polarity. Close the lid.
• Place the scales on a flat, stable surface
WEIGHING
• Turn on the scales by pressing «On /Off/Tare» button
• Wait a few seconds until the display shows "0.00"
• Place the product on the scales, the display will show its weight.
• Press «Unit» button to change the measurement units to grams (g), kilograms (kg), pounds (lb), ounces (oz)
• To measure the tare weight, place the container on the scales, press the «On/Off/Tare» and without removing the container from the scales, place product into the container. The display will
indicate weight of the products only.
• To maximize battery life, always press the «On/Off/Tare» to switch off scales after use.
AUTO SWITCH-OFF
• Scales automatically switches off after 2 minutes downtime.
INDICATORS
• «ЕЕЕЕ» - overload indicator.
• «LO» - low battery charge.
• If the products or container are not fixed on the platform or weight is over the limit, the display shows «OUTZ» or «UNST», then the scales are automatically off.
BATTERY LIFE
• Always use the recommended battery type.
• Before using the device, make sure that the battery compartment is tightly closed.
• Insert new batteries, observing polarity.
• Remove the battery from the scales, if they are not used for a long time.
5