Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for charging mobile phones, tablets and other USB devices
1 – Connect the main USB jack of 4in1 cable to USB 5V 2A output port of the starter.
2 – Select the appropriate connector for your mobile phone, tablet... and connect it to your device. LT-09 starter can
identify and automatically load the electronic device. Indicator lights are lit when charging any device.
Multifunction LED flashlight
Hold the multifunction button for 3 seconds to activate the LED flashlight. Then, 3 LED lighting modes appear in
sequence by briefly pressing the multifunction button (normal flashlight / flashing light / SOS signal). Pressing the
button for the fourth time, the flashlight will turn off.
PARTS LIST
TECHNICAL SPECIFICATIONS
Parts name
1
LT-09 starter
2
4in1 USB cable
3
Mains charger
4
12V charger
5
Jumper cable with battery clamps
6
Instruction manual
1
Size : 142x73x30mm
2
Weight : 295g
3
Outputs : USB 5V 2A / 12V (starter)
4
Inputs : 14V 1A / 5V 1A
5
Full charging time : 3 hours approx.
6
Start current : 200A
7
Peak current : 400A
8
Operating temperature : -20ºC ~ 60ºC
Qty
1
1
1
1
1
1
Publicidad
