Publicidad
Idiomas disponibles
Idiomas disponibles
E
N
G
L
3. Connect the USB flash drive, as shown below:
I
S
H
Note:
The USB port can also be used to connect the Wi-Fi USB dongle WF40/WF50, color-screen expansion module EXP50 or USB
headset.The Wi-Fi USB dongle WF40/WF50 and color-screen expansion module EXP50 should be purchased separately. For more
information on how to use the WF40, WF50 or EXP50, refer to Yealink Wi-Fi USB Dongle WF40 User Guide, Yealink Wi-Fi USB
Dongle WF50 User Guide or Yealink EXP50 User Guide. For more information on how to use USB headset, refer to the
documentation from the manufacturer.
4. Connect the network and power, as shown below:
You have two options for network and power connections. Your system administrator will advise you which one to use.
Note:
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may
cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable
provided by Yealink.
If inline power (PoE) is provided, you don't need to connect the power adaper. Make sure the hub/switch is PoE-compliant.
Startup
After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user
interface or web user interface.
2
PC
PC Connection
(Optional)
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
PC Connection
PC
(Optional)
Power Adapter
(DC 5V)
IEEE 802.3af compliant
PoE Hub/Switch
Welcome
Initializing... Please wait
Publicidad
