MSW Motor Technics MSW-ET-250 Manual De Instrucciones página 21

m) The product is not a toy. Cleaning and maintenance must not be performed by children without adult
supervision.
n) Do not tamper with the device to alter its performance or design.
o) Keep the unit away from sources of fire and heat.
p) Do not block the ventilation openings of the unit!
q) Using the unit to carry weights exceeding its maximum load is forbidden.
r) Do not allow people or animals to stand under suspended loads.
s) Transporting the load by means of the unit over people or animals is prohibited.
t) Transporting people or animals by means of this unit is prohibited.
u) When transporting with the unit, avoid shocks, impacts and sudden changes in speed. This will reduce
the risk of the load falling from a height.
v) Before suspending the load, always ensure that the space in which it will be transported is clear of
obstructions.
w) Bystanders should be warned of the operation of the equipment and should stay at a safe distance from
the load.
x) Always pay close attention to the load.
y) Do not leave suspended loads unattended.
z) Avoid rocking the load.
aa) Do not perform mechanical or similar work (welding, cutting, etc.) on suspended loads.
bb) If the load falls, there is a risk of injury or death.
cc) Do not walk or stand under suspended loads (or in their immediate vicinity).
dd) When using the machine, it is forbidden to pull the chain in any direction other than along the track.
Pulling sideways may cause damage to the unit
ee) Do not use excessive force or jerk the cable if resistance is encountered.
ff) Avoid switching on/off sequences at very short intervals.
gg) Make sure that the equipment moves in the direction specified by the controls.
hh) Disconnect the unit from the power supply when not in use.
ii) Do not move loads that are pinned to the ground or blocked by other objects.
jj) Loads must be lifted off the ground at the slowest possible speed.
kk) The permissible load is constant and does not depend on the position in which the load is placed.
ll) The device is not designed for continuous operation. Observe the operating cycle of the device.
mm) If the equipment is used in noisy environments, the operator should wear hearing protection.
nn) Always make sure that the load is properly and securely attached to the hook.
oo) Always maintain a safe distance from the load and rope.
pp) Do not use limit switches as routine stop items. They are emergency devices only.
qq) Do not drag loads on the ground.
rr) Always keep a safe distance from the load and chain.
ss) Do not use the machine with a twisted, tangled, damaged or worn chain.
tt) Do not lift the load until it is in a central position under the machine.
uu) It is forbidden to extend or repair the chain. A damaged chain must be replaced with a new one at the
manufacturer's service facility.
vv) Protect the unit and the chain from harmful contamination.
ww) Do not work with the machine if the chain cannot form a straight line from the machine body to the hook
attached to the load.
xx) Do not use the chain as a sling and do not wrap the chain around the load.
yy) Do not put any strain on the tip of the hook or the hook latch.
zz) Do not operate the chain beyond its movement limits.
aaa) The load must be balanced so that it does not tilt during transport and does not fall out of its mount.
bbb) Regularly check that the limit switches of the device are working properly.
ccc) Before each lifting operation, check the operation of the brake by applying tension to the chain.
ddd) The machine must be inspected regularly and damaged or worn parts must be replaced by an authorized
service center.
CAUTION! Although the product has been designed to be safe, with adequate safeguards, and despite
the additional safety features provided to the user, there is still a slight risk of accident or injury when
handling the unit. Caution and common sense are advised when using the product.