Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and maintaining
you must turn off the emergency switch before cleaning poWerbot.
Cleaning the dustbin
Clean the dustbin when the filter inspection indicator (
1
Remove the dustbin
4
Detach the cyclone unit
from the dustbin cover,
and then wash the
dustbin and the filter
Cleaning the sensors and the camera
Lightly wipe with soft cloth. Do not use water or cleaning solutions.
) turns on or if there's too much dust in the dustbin.
2
Remove the dustbin
cover
5
Reassemble the
dustbin
Camera
Front sensor
window
ENGLISH-19
3
Remove dust in the
dustbin and cyclone
unit
6
Reinsert the dustbin
into the main body until
it clicks
Cliff sensors
"click"
Rear sensor
window
Publicidad
