Disposal; Spare Parts And Accessories - Garant 100 Manual De Instrucciones

Welding:
Since the anvil and also the clamping faces of the jaws have been
carefully surface hardened, when performing welding or brazing work on
workpieces clamped in the vice take great care that the welding/brazing
flame does not cause loss of hardening of these surfaces.
If necessary, cover the anvil or clamping faces with flame-proof or
heat-resistant materials.
6.

Disposal

Dispose of the vice and all accessory parts in accordance with local
▶
regulations.
7.

Spare parts and accessories

Spare parts:
obtainable from the Hoffmann Group: www.hoffmann-group. com
Accessories:
Height adjuster, swivel base, spare jaws, soft jaws are available, see
the Hoffmann Group "Workstations and storage" catalogue.
www.hoffmann-group.com
DE
EN
FR
IT
ES
17