Publicidad
Idiomas disponibles
Idiomas disponibles
8.3.
Electric Power Supply Connection
Connection must be carried out by authorised and
qualified
staff,
respecting
regarding the subject and using appropriate
prescribed material.
Before connecting the appliance to the
electric mains check that the voltage and the
frequency correspond to the data stated on the
registration plate applied on the rear of the
appliance.
The equipment is supplied with one of the
following operating voltages:
8.4.
Inspection
The appliance is delivered in conditions that it can
be started-up by the user.
This functionality is guaranteed by passing the
tests (electric inspection - functional inspection,
9.
TECHNICAL NOTES
9.1.
Accessory wheels assembly kit
Unscrew the feet (1) until they are
removed completely
Fix the wheel (2) and base (3) board to
the bottom of the cabinet using the
screws supplied.
1
the
current
laws
17
230V 1~ 50Hz
220V1~ 60Hz.
!
Before connection, ensure the presence of a
relevant differential switch with adequate power in
the mains power supply, upstream from the
appliance, in order to protect the appliance from
overloads or short circuits
appearance inspection) and relative certification
through the specific attachments.
The screws of each wheel can be inserted
in the envisioned 4 Ø 6mm holes.
ENGLISH
3
2
GB
Publicidad
