Next Level Racing FLIGHT STAND PRO Manual De Instrucciones página 13

04
Secure the Pedal Frame with a M8 Knob.
Note: If setting up
the Flight Stand on
uneven floors, it is
recommended to
install with the Height
Adjustable Feet to
stabilise the cockpit.
05
Align the M8 Castor Wheels and Square Washers with the threaded inserts on the Frame and fasten
using the 14mm Wrench.
A)
06
A) Align the slot on the Pedal Brackets with the threaded inserts on the Pedal Frame.
B) Bolt through and secure with 2 x M8 Knobs. Repeat on the other side.
B)
13
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x M8 20mm Knob
PARTS:
• • 4 x M8 Square Washers
• • 4 x Castor Wheels/ Height
Adjustable Feet
PARTS:
• • Pedal Brackets
(LEFT)
Repeat
• • 4 x M8 20mm Knobs
on Other
Side
OR
(RIGHT)