Next Level Racing FLIGHT STAND PRO Manual De Instrucciones página 21

A)
28
A) Align the mounting holes on the HOTAS Swivel Bracket with the threaded inserts on the HOTAS Mounting Bracket.
B) Bolt through and secure with 2 x M8 Bolts and Washers.
29
Align the curved slot on the HOTAS Swivel Bracket with the threaded inserts on the HOTAS Mounting
Bracket. Bolt through and secure with 2 x M8 Ratchet Handles and Washers.
30
Align the mounting holes on the Pre-Assembled HOTAS Plate with the slots on the HOTAS Swivel
Bracket.
B)
21
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x HOTAS Swivel Bracket
• • 2 x M8 16mm Sockethead Bolts
• • 2 x M8 Washers
PARTS:
• • 2 x M8 12mm Ratchet Handles
• • 2 x M8 Washers
PARTS:
• • Pre-Assembled HOTAS Plate