Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Decals
• Save all instructions
This tiller has been designed and manufactured to provide
you with the safety and reliability you would expect from an
industry leader in outdoor power equipment manufacturing .
Although reading this manual and the safety instructions it
contains will provide you with the necessary basic knowledge
to operated this equipment safely and effectively, we have
placed several safety labels on the tiller to remind you of this
important information while you are operating the unit .
These important safety labels are illustrated below, and are
shown here to help familiarize you with the location and
content to the safety messages you will see as you perform
normal tilling operations . Please review these labels now .
If you have any questions regarding their meaning or how
Questions? Call Toll Free at 1-800-737-2112
to comply with these instructions, reread the complete
safety instruction text on the preceding pages, or contact
your local dealer .
Should any of the safety labels become unreadable because
of being worn, faded, or otherwise damaged during the use
of your tiller, please contact your local authorized dealer to
order replacement labels .
The safety labels are easily applied, and will act as a constant
visual reminder to you and others who may use the equipment .
Following the safety instructions is necessary for safe, effective
operation of your tiller .
• Gasoline is flammable. Allow engine to cool at least 2 minutes
before refueling.
• Operation of this equipment may create sparks that can start
fires around dry vegetation. A spark arrestor may be required.
The operator should contact local fire agencies for laws or
regulations relating to fire prevention requirements.
Copyright © 2018 MAT Engine Technologies, LLC
6
• Keep away from
rotating tines.
• Contact will result
in injury.
1. Insert the locking pin to secure the
wheels in locked position.
2. Turn the Engine Switch to the "ON" position.
3. Move the Fuel Valve lever to the "ON" position.
4. Move the Choke lever to the "START" position.
5. Adjust the Throttle Control to the high speed.
6. Pull the Starter Handle until engine starts
7. After starting the engine, move the Choke lever
to the "RUN" position.
Publicidad
