LawnMaster NPTBL26A Manual Del Usuario página 12

ASSEMBLY
ASSEMBLING THE BLOWER TUBES (See Figs. 1-6)
■ The nut on the screw securing the front opening on the blower shall be sufficiently loose to insert the blower
tube into the front opening on the blower. Turn the nut counter clockwise using the spanner provided to
loosen it (Fig. 1).
■ Insert the rear blower tube into the front opening on the blower. Pay attention that the notch on the blower
tube aligns with the middle of the upper part of the front opening. Make sure the raised tab on lower part of
the blower tube aligns with the slot on the lower part of the front opening. Insert the rear blower tube into
place and secure the nut tight using the spanner (Fig. 2 & 3).
Notch
Fig. 2
12
Fig. 1
Fig. 3