Publicidad
Q x 4
Fig. 2
2. Attach an End Apron (Ea) to the Left Front Leg (A) and Left Back Leg (B) by placing a thin layer of
glue into the dowel holes of each leg. Insert the dowels in the End Apron (Ea) into the legs making
sure the Rafix Cams (M) face into the unit and are on the top edge of the aprons. Gently tap with
a rubber mallet and quickly wipe away any excess glue with a damp rag. Using the pocket
holes as guides, secure the pieces with two #8x1-1/4" Pan Head Screws. See Figure 2.
Repeat the step for the Right Back Leg (C) and the Right Front Leg (D).
T x 2
Drill out these
pilot holes.
Fig. 3
3. The Towel Bar (S) can be mounted to either the left or right side of the cart. Once you have
decided which side to mount it on, drill out the pilot holes for that side only. The pilot holes include
a larger countersink hole and a smaller hole for the bolts that hold the Towel Bar (S) to the End
Apron (Ea). Place a 3/16" drill bit into the smaller hole and slowly drill out the hole, making sure not
to tear out the wood on the outside face of the apron. See Figure 3.
Attach the Towel Bar (S) to the End Apron (Ea) using two #8x1" Machine Screws (T). See Figure 3a.
Page 4 — 158Wb — 11/14
M
Ea
Q
A
Right Side Assembly shown.
Ea
M
Ea
Q
C
B
S
D
T
Ea
T
Fig. 3a
Publicidad
