Publicidad
Q x 4
Fig. 6
6. Attach both Rack Assemblies (Ga) by spreading a thin layer of glue in the dowel holes in the legs
of the Left Side/Top assembly. Place the dowels in the Rack Assemblies (Ga) into the holes,
making sure the pocket holes face the bottom. Using the pocket holes as guides, secure with
four #8x1-1/4" Pan Head Screws (Q). See Figure 6.
Q x 5
Fig. 7
7. Spread a thin layer of glue in the dowel holes in the legs of the right side assembly. Attach to
the Top Assembly (Hb) by sliding the Rafix Cams (M) in the End Apron (Fb) over the Rafix Bolts (N)
in the top and by inserting the dowels into the dowel holes. Using the pocket holes as guides,
secure the pieces with five #8x1-1/4" Pan Head Screws (Q) throught the Back Apron (Fb) and Rack
Assemblies (Ga). See Figure 7.
Page 6 — 158Wb — 11/14
Hb
M
N
Q
Hb
Fb
Ga
Q
Q
Q
Ga
Ga
Q
Q
Q
Q
Ga
Q
Publicidad
