Olympus SP-500 UZ Manual Básico página 18

Use the AV cable provided with the camera to play back recorded images on your TV.
Both still pictures and movies can be played back.
1
Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video input terminal on the TV using the AV cable.
En
Connect to the TV's
video input (yellow) and
audio input (white)
terminals.
2
Turn the TV on and set it to video input mode.
For details of switching to video input, refer to your TV's instruction manual.
3
Set the mode dial to q, and press the POWER button to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad (s/r/p/q) to select
the picture you want to display.
Thumbnail (Index) Display
This function lets you show several pictures at the same time on the monitor when
reviewing pictures.
1
Pull the zoom lever toward W (G) to switch to the
thumbnail (index) display.
Use the arrow pad (s/r/p/q) to select a picture and
press Z to display it in single frame playback.
Pull the zoom lever toward W to display the pictures in
4, 9, 16 or 25 frames.
18
CONNECTING THE CAMERA
Playback on a TV
Connector Cover Multi-Connector
AV Cable
Index display